Concrete is a building material that is composed of aggregate, which is elegant and coarse mixed with cement paste. This mixture usually hardens over a period. Concrete is the most traditional versatile choice of all the materials to build patios. It is popularly known due to its decorative finishes with unlimited design potential. It is used for the construction of slabs, beams, and other load-bearing elements in building construction. This article will discuss detailed information on the steps that are needed for the installation of concrete patios.
Steps involved in transforming an attractive backyard with concrete patios
Preparation of the backyard
You should first start by preparing the yard for concrete installation. It consists of clearing the area for placement of the concrete for it to reach the site. You should eliminate any contaminants such as debris, loose rocks, plants, and any other items, or you can get more professional assistance through concrete patios near me. Any mounds of dirt in need to be moved and filled as concrete need a level surface. The ground doesn’t have to be completely level since the base rock will be filled in small gaps. It should just be even.
Build forms for the patio area
You should build a wooden structure matching the outline of the desired patio shape. Spraying paint on the framework is also required. For example, in an area with curves, you should use bender boards to capture the sketch. The ground should be pounded with stakes to secure the forms with about one foot between the stake.
Spread the base rock
Concrete needs a layer of rock underneath because it is not placed directly on the dirt. Inside the concrete forms, you should spread a two to three- inch layer of base rock. The base rock makes the concrete’s foundation strong and compacts under pressure.
Install the rebar
Rebar is vital in large areas such as patio since it prevents the concrete from cracking over time. It also makes the concrete to be more reliable. With one pole about every two to three feet, you should lay out the rebar in a grid pattern. To ensure the rebar pieces are tied together where they cross, you should use pliers and metal rebar to link them.
Pump the concrete
Depending on the backyard you are constructing, you can directly pump the concrete from the truck into the forms. You can also bring the concrete back to the forms one load at a time using a wheelbarrow. The usage of a wheelbarrow is another alternative if pumping direct from the truck is impossible. After putting the concrete into the forms, you should start spreading it around so that it fills the forms evenly. Level out the pavement for a smooth surface using trowels and concrete floats.
You should tint concrete using powdered concrete color. Begin tossing handfuls of color onto the pavement once the concrete is as dried. Use concrete floats to smooth the powder into the concrete. When working with powdered concrete color, you should always wear safety glasses and a dust mask. To prevent hands from staining, you should put on rubber gloves.
Add the salt finish
The crystals of mineral salts should be thrown around the concrete to add texture. Using a flat concrete hand tool, press the salt into the concrete and allow it to settle overnight.
Remove the forms
Remove the concrete structures carefully once the concrete dry. Before removing the ways, follow the supplier’s instructions on how long you should let the concrete set. To reveal the porous texture left behind, ensure you sweep the salt from the concrete. The plants should also be kept away from the salt. Notably, the concrete is more versatile. It allows you to accommodate restrictions space of backyard or incorporate curves that are attractive since they are easily formed into any shape. It can also withstand harsh conditions due to its high durability. Concrete is a solid surface; thus it is always easier to maintain it. In terms of expense, concrete is less expensive as compared to other building materials. However, concrete pavers can fade over time, especially in sunny areas, since they are dyed with color pigments. The surface of concrete tends to wear more easily by eroding the smooth finish. When the flat surfaces are eroded, the aggregate underneath is exposed. It also has a shorter life span since it wears out quickly.